'STERCO' Servo Stabilizer is a revolutionary product in the field of voltage stabilization. It is specially built for constant voltage output for the areas where voltage supplies is fluctuating and damages the sophisticated equipments. This system keeps in check voltage variations by fast rate of correction. It is designed for working on single phase as well as three phase AC supply. These stabilizers are manufactured for continuous use at full load, and are suitable for Balanced & Unbalanced load.
Desciption:
"Sterco' (AVR) consists of the followings:-
|
Coninuously variable Voltage Regulator. |
|
Electrolytic Copper Wound Buck Boost Transformers duly vacuum impregnated. |
|
Electronic Control Circuit and meter panel. |
|
Synchronous motor is controlled by thyristors which are itself controlled by CMOS integrated circuit. Thus the whole system is quite solid state. The Buck Boost Transformer and Variac are oil cooled housed in same or separate sheet metal tanks. Radiators provided for effective cooling if required. The transformer is incorporated with core of high grade Electrical Silicon steel Lamination to minimize the losses. |
The Buck Boost Transformer and Variac are oil cooled housed in same or separate sheet metal tanks. Radiators provided for effective cooling if required. The transformer is incorporated with core of high grade Electrical Silican steel Lamination to minimise the losses.
Advantages:
|
Energy Saving. |
|
Improved Power Factor. |
|
Lower Break Down for Electrical Equipment. |
|
100% Depreciation. |
|
End product with uniform quality. |
Additional Facilities Can Be Provided At An Extra Cost :
|
Low / High Voltage Protection |
|
By Pass Switch |
|
Single Phase Preventor |
|
Reverse phase Preventor |
|
Overload Protection |
|
|
Technical Specifications
Type |
Single Phase |
3Ø Balance Load |
3Ø Unbalance Load |
Input Voltage Range |
160 V- 260 V AC |
300 V - 460 V AC |
KVA Rating
Capacity |
0.5, 1, 2, 3.15, 5, 8, 10, 16, 20, 25, 31, 5, 40, 50, 100, 125, 150, 200, 300 &350 KVA |
3, 5, 10, 15, 20, 25, 30, 40, 50, 80, 100, 125, 150, 200, 300, 400, 500, 600, 1000 upto 2000 KVA |
Output Voltage
Rated Operating Frequency |
225V - 230V AC Settable
50 HZ |
400V - 415V AC Settable
50 HZ |
Metering |
72 mm to 100 mm Dial Accuracy 1.5 Voltmeter with Selector switch to indicate Input and output Voltage. |
Input / Output Connection
Upto KVA
Over 2 KVA |
15 Amps. Plug and socket
Terminal for input & output Connections |
Indicator |
Mains 'on' pilot lamp on front panel, Low and High limit indicator of Dimmer on front panel. |
Mains pilot lamp on each phase low and High limit indicator of Dimmer on front panel. Oil indicator will there |
Manual Control |
Provision for manual control of output. |
Provision for manual control of output on each phase. |
Cooling
Air Cooling
Oil Cooling |
0.5 - 10 KVA
15 KVA - 350 KVA |
2.5 - 30 KVA
40 KVA - 20000 KVA |
Output Voltage
Regulation |
± 1% |
± 1% |
Rate of Correction |
20 Volts / Second |
30 Volts / Second |
Efficiency |
More than 90% |
Duty Cycle |
.............................................................................100%..................................................................... |
Specifications |
IS : 9815 (Part 1) / 1994 (Reaffirmed 1999) |
Manual Voltage Stabilizers are also available None - Standard input and output ranges are also available against specific requirements. |