Rocker ARM Spot Welder (Pneumatically Operated) Model - SWE (P) - India

call us

+91 98 1020 5299

Product Range

Spot Welders
Rocker ARM Spot Welder (Pneumatically Operated) Model - SWE (P)

Rocker ARM Spot Welder (Pneumatically Operated) Model - SWE (P)

"STERCO" make ROCKER ARM PNEUMATICALLY OPERATED SPOT WELDER are most suitable for mass production, due to its pneumatic operation, less operational efforts are required. These machines are designed & developed to meet the needs of a vast number of sheet metal fabrication shops and can be used for electro brazing, cross wire welding, projection welding & resistance heating. Salient Design Feature Machine body is designed for its ruggedness and easy maintenance. A heavy Gun Metal bracket is provided on top of the frame for Rockering the upper arm holder. "T" slotted face plate allows both vertical and horizontal adjustment of lower arm. Because of this special electrode holder clamping system current in the carrying section increases. ELECTRONIC & ELECTRICAL CONTROL SYSTEM Machine consists of precision "STERCO" make SOLID STATE C-MOS INTEGRATED WELD TIMER with heavy duty electromagnetic contactor for switching purpose. Timer consists of squeeze (Range 0-250 cycles, step less control), Weld Timer (Range will be 5-99-199 cycles adjustable in step of one cycle)and to adjust the welding. Current from 50 to 100%, one tap changing switch of 8 steps had been provided on the machine. COOLING SYSTEM Arms, electrode holders, electrodes etc. are water cooled. Water cooled transformers can be provided at an extra cost. PNEUMATIC SYSTEM The basic pneumatic system consists of a pneumatic double acting cylinder, solenoid valve of 4 ways 5 port, filter, lubricator, regulator gauge and foot operated initiating switch for solenoid coil. ELECTRODE SYSTEM The electrode force is attained through the rocker arm mechanism coupled with the pneumatic cylinder. The electrode force can be adjusted with the help of Air regulator installed on the machine. FOR FINE CONTROL A pair of thyristor can be provided for switching purpose in place of electromagnetic contactor at an extra cost. By using thyristor, Heat Current can be controlled from 5 to 95% of the current available.Weld time is also adjustable from 1 to 99 cycles in step of one cycle each. Extra Features Additional ARMS AND ELECTRODE HOLDERS can be provided at an extra cost. This model is also available in PEDAL OPERATED; Ask for MODEL - SWE (A)
Technical Specifications
Machine Model		SWE(P) - 10	SWE(P) - 15	SWE(P) - 25	SWE(P) - 35	SWE(P) - 50	SWE(P) - 75
Rating KVA at 50% Duty Cycle		10	15	25	35	50	75
Throat Clearance
Min.	MM	175	175	175	175	175	175
Max.	MM	200	300	300	300	350	350
Max. Available Short Circuit Current at 30 cm Throat Depth	K.AMPS	9.5	10.5	16	19	24	28
Nominal Electrode Force at 5.62 kg/cm2 Air Supply	MM	250	250	250	450	450	450
Rocker Arm Diameter	MM	38	51	57	57	62	70
Electrode Holder Diameter	MM	19	22	25.4	25.4	25.4	32
Length of Upper Electrode Holder	MM	200	200	200	200	200	200
Length of Lower Electrode	MM	200	200	200	200	200	200
Types of Transformer Cooling		Air	Air	Air	Air	Water	Water
Arms & Electrode		Water	Water	Water	Water	Water	Water
Overall Dimension Without Throat Depth	In cms WxDxH (Approx.)	30 x 55 x 120x	33 x 60 x 125	35 x 63 x 130	35 x 65 x 130	40 x 72 x 140	40 x 75 x400

Note: We reserve the right to change the design and modify specifications at the discretion of our technical department.